BEST ACCESS SYSTEMS 45HM IDH Max Mortise Locks Spezifikationen PDF herunterladen (Seite 8)

Installation Instructions for 45HM IDH Max® 1300 Mortise Locks

BEST ACCESS SYSTEMS

a Division of Stanley Security Solutions, Inc.

Installing the trim

13 Install concealed cylinder & core

(DEU/DEL and TDEU/TDEL functions

only)

1 Use a cylinder wrench to thread the cylinder into the

mortise case so that the groove around the cylinder is

even with the door surface as shown in Figure 13.

Caution: A malfunction can occur if the cylinder is

threaded in too far.

2 Secure the cylinder in the mortise case with the

cylinder retainer screw.

3 Insert the control key into the core and rotate the key

15 degrees to the right.

4 With the control key in the core, insert the core into

the cylinder.

5 Rotate the control key 15 degrees to the left and

withdraw the key.

6 The control key can be used to remove cores and

to access doors. Provide adequate security for the

control key.

Figure 13 Installing the concealed cylinder

Cylinder

retainer

screw

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Keine Kommentare

BEST ACCESS SYSTEMS 45HM IDH Max Mortise Locks Spezifikationen Seite 8